Product Description
The e85Freaks 3/8" Fuel Quick-Connect to -6AN Adapter Fitting converts a compatible 3/8-inch automotive fuel quick-connect connection to a standard -6AN 37-degree flare connection.
It is intended for universal automotive fuel-system plumbing where a 3/8-inch quick-connect connection needs to transition to -6AN hose, hardline, or other AN plumbing.
Quick Specs
- Quick-Connect Size: 3/8 inch
- AN Connection: -6AN
- AN Seal Type: 37-degree flare
- Application: Universal automotive fuel-system plumbing
- Finish: Black
- Quantity: One fitting
3/8" Fuel Quick-Connect to -6AN
This adapter provides a clean transition from a compatible 3/8-inch fuel quick-connect connection to -6AN, allowing fuel-system components using a 3/8-inch quick-connect interface to integrate with AN fuel plumbing.
It can be used when adapting compatible factory-style or aftermarket fuel components into a custom -6AN fuel system.
Standard -6AN 37-Degree Flare Connection
The AN side uses a standard -6AN 37-degree flare sealing surface for use with compatible -6AN hose ends, adapters, and other AN plumbing components.
The AN connection seals at the flare surface rather than at the threads, so thread sealant should not be applied to the AN flare threads.
Universal Fuel-System Adapter
This is a universal technical fitting intended for builders who already know the connection required for their application.
Before ordering, verify that the component being adapted uses a compatible 3/8-inch automotive fuel quick-connect connection and that the opposite side of the system requires -6AN.
Unbranded by Design
Like other e85Freaks AN plumbing components, this fitting uses a clean exterior without oversized logos or manufacturer markings.
Unbranded by design—because the fitting should complete your build, not compete with it.
What Is Included?
- One e85Freaks 3/8" fuel quick-connect to -6AN adapter fitting
Fuel hose, hose ends, retaining clips, fuel lines, and other fuel-system components are not included unless specifically shown as included.
Installation Notes
Confirm the quick-connect size and connection style before installation. Make sure the mating quick-connect components and sealing surfaces are clean and undamaged.
After installation, pressurize the fuel system and inspect all connections carefully for leaks before operating the vehicle.
