The e85Freaks 3/8" Fuel Quick-Connect to -8AN Adapter Fitting converts a compatible 3/8-inch automotive fuel quick-connect connection to a standard -8AN 37-degree flare connection.
It is intended for universal automotive fuel-system plumbing where a 3/8-inch quick-connect connection needs to transition into -8AN hose, hardline, or other AN plumbing.
Quick Specs
- Quick-Connect Size: 3/8 inch
- AN Connection: -8AN
- AN Seal Type: 37-degree flare
- Application: Universal automotive fuel-system plumbing
- Finish: Black
- Quantity: One fitting
3/8" Fuel Quick-Connect to -8AN
This adapter provides a direct transition from a compatible 3/8-inch fuel quick-connect connection to -8AN, allowing components that use a 3/8-inch quick-connect interface to connect with larger -8AN fuel plumbing.
It can be used with compatible factory-style or aftermarket fuel-system components where the required connection is 3/8-inch quick-connect on one side and -8AN on the other.
Standard -8AN 37-Degree Flare Connection
The AN side uses a standard -8AN 37-degree flare sealing surface for connection to compatible -8AN hose ends, adapters, and other AN fuel-system components.
The AN connection seals at the flare surface rather than at the threads, so thread sealant should not be applied to the AN flare threads.
Using a 3/8" Quick-Connect with -8AN Plumbing
This fitting allows a 3/8-inch quick-connect component to integrate directly with a fuel system using -8AN plumbing.
The -8AN connection does not increase the internal size or flow capacity of the original 3/8-inch quick-connect connection. Overall fuel-system capacity is determined by the complete system, including the smallest or most restrictive components in the fuel path.
Universal Fuel-System Adapter
This is a universal technical fitting intended for builders who already know the connection required for their application.
Before ordering, verify that the component being adapted uses a compatible 3/8-inch automotive fuel quick-connect connection and that the opposite side of the system requires -8AN.
Unbranded by Design
Like other e85Freaks AN plumbing components, this fitting uses a clean exterior without oversized logos or manufacturer markings.
Unbranded by design—because the fitting should complete your build, not compete with it.
What Is Included?
- One e85Freaks 3/8" fuel quick-connect to -8AN adapter fitting
Fuel hose, hose ends, retaining clips, fuel lines, and other fuel-system components are not included unless specifically stated.
Installation Notes
Confirm the quick-connect size and connection style before installation. Make sure the mating quick-connect components and sealing surfaces are clean and undamaged.
After installation, pressurize the fuel system and carefully inspect all connections for leaks before operating the vehicle.
