JBtuned 2002-2006 Acura RSX DC5 Full Clutch Line Replacement

Replace the complete factory clutch hydraulic line on your 2002-2006 Acura RSX with a JBtuned full master-to-slave clutch line.

Designed for the USDM Acura RSX DC5, this system replaces the entire OEM clutch-line assembly with a single PTFE-lined, stainless-steel braided hydraulic line using stainless-steel fittings and application-specific hardware.

Quick Specifications

• Product Type: Full master-to-slave clutch line replacement
• Vehicle: 2002-2006 Acura RSX
• Chassis: DC5
• Engine Compatibility: K20 and K24 configurations
• Master Cylinder: OEM RSX clutch master cylinder
• Line Construction: PTFE inner liner with stainless-steel braid and black protective coating
• Fittings / Hardware: Stainless steel
• Sealing Washers: Copper
• Factory Clutch Line: Completely removed / no longer used

Complete Master-to-Slave Replacement

This is not a short replacement flex hose that reconnects to the original Acura clutch hard line.

The JBtuned RSX clutch line runs from the clutch master cylinder directly to the transmission slave cylinder, replacing the complete factory hydraulic path between the two components.

No portion of the OEM clutch line is retained.

This simplifies the hydraulic system and provides a clean replacement option for aging factory clutch plumbing, modified cars, engine swaps, or engine bays where the original line arrangement is no longer desired.

Designed for the Acura RSX DC5

This clutch line is designed specifically for the USDM 2002-2006 Acura RSX DC5.

It is compatible with K-Series drivetrain configurations using the RSX-style hydraulic clutch system, including K20 and K24 engine combinations with a compatible K-Series manual transmission.

This is an application-specific clutch line rather than a universal hydraulic hose.

OEM RSX Clutch Master Cylinder

The line is configured for use with the OEM-style Acura RSX clutch master cylinder.

The master-side connection is designed around the factory RSX hydraulic configuration, while the opposite end connects to the transmission slave cylinder using the supplied stainless-steel hardware.

Cleaner, More Direct Routing

Because the JBtuned line replaces the complete factory clutch-line assembly, it does not need to duplicate the original multi-piece hydraulic routing.

The line can be routed cleanly beneath the transmission-mount area and toward the slave cylinder, reducing the amount of visible clutch plumbing in the engine bay.

The result is a simpler hydraulic path while still maintaining full master-to-slave operation.

PTFE Line with Stainless-Steel Hardware

The JBtuned RSX clutch line uses a PTFE inner liner surrounded by stainless-steel braided reinforcement with a black protective outer coating.

The line uses permanently crimped stainless-steel fittings, with Mil-Spec resistant heat shrink protecting the hose-end transitions for a clean, durable finished assembly.

The supplied banjo bolt and slave-cylinder adapter are also stainless steel, with copper sealing washers provided where required.

Why Replace the Factory RSX Clutch Line?

As the factory hydraulic components age, replacing only one flexible section still leaves the remaining original clutch-line plumbing in place.

A full master-to-slave replacement removes the entire OEM line from the system and replaces it with one purpose-built hydraulic assembly.

This makes it useful for:

• Replacing aging factory clutch plumbing
• Modified or restored RSX builds
• K20 or K24 engine configurations
• Engine-bay cleanup
• Cars where the factory clutch-line routing is no longer desired

What Is Included?

• JBtuned full-length RSX DC5 clutch line assembly
• Stainless-steel banjo bolt
• Stainless-steel slave-cylinder adapter
• Copper sealing washers

Installation Notes

Route the hydraulic line with adequate clearance from exhaust components, moving parts, sharp edges, drivetrain movement, and other potential sources of heat or abrasion.

After installation, properly bleed the clutch hydraulic system and inspect all fittings and connections for leaks before operating the vehicle.

This product replaces the complete factory RSX clutch line from master cylinder to slave cylinder.