JBtuned EG Ek Civic DC Integra Fuel Tuck Kit Extensions
This kit is designed to go from the gas tank to the spot in the engine bay where you cut your hard lines for your tuck kit. You are supplied with the adapters to connect the two different sections of line together and you have now converted your tuck kit to a full on race ready fuel system.
This kit is for anyone running any of our fuel line tuck kits for the EG, EK, and DC chassis. That is right, H swap, K swap, B swap, or just a D-series tuck, this kit will work for
This kit is made from the same 6AN feed and return lines we use to make our fuel tuck kits.
This kit was designed for the JBtuned Hanger upgrade Kit
Cannot be used with unmodified OEM hanger
If you are running an older style kit that connects to your hard line with a hose clamp. We will provide you with a fitting for that you will have to install on the line.
Approved for occasional e85 and race gas use but should primarily be used with pump gas.
Info we need in the drop downs:
Clamp Kit: Provides 10 P Clamps to hold lines to the undercarriage of the car.
Fuel Pump Hanger Upgrade Kit:This is a fitting kit that is used to modify your OEM fuel sending unit to accept our kit. It included 1 PTFE e85 resistant line for the fuel pump feed. The clamps needed for that line, the bulkhead fittings and lastly a bulkhead for the fuel pump wiring. See images for more clarification if need. In this section you tell us which fuel pump you are using because this kit changes based on the fuel pump.We highly recommend this if you do not already have a modified sending unit.